Skip to content 
10G SFP+ RJ45 Copper 30m Industrial Transceiver
Categories:
Product Highlights:
- 10Gbps Ethernet over standard RJ45 copper
- Up to 30m transmission over Cat6A/Cat7
- Industrial -40°C to +85°C operating range
- Fully metallic enclosure for EMI shielding
- Hot-pluggable SFP+ design
- Broadcom and HP compatibility options
Table of Contents
Description
The 10G SFP+ Copper RJ45 30m Industrial Transceiver is a high-speed copper networking module designed to provide 10Gbps Ethernet connectivity through an SFP+ host interface. With a standard RJ45 electrical interface, it supports transmission distances of up to 30m over Cat6A or Cat7 copper Ethernet cabling, allowing SFP+ switches, routers, servers, and other compatible equipment to connect directly to existing copper infrastructure. The hot-pluggable design simplifies installation and replacement, while the fully metallic enclosure provides enhanced electromagnetic shielding and mechanical protection. Supporting an industrial operating temperature range of -40°C to +85°C, along with TX Disable, RX Loss of Signal, and 2-wire serial management functions, the module is suitable for industrial Ethernet, data center, and other demanding networking environments, with compatibility options available for specific Broadcom- and HP-based platforms.
Specification
| Data Rate | 10Gbps |
|---|---|
| Form Factor | Hot-Pluggable SFP+ |
| Maximum Transmission Distance | Up to 30m |
| Ethernet Standard | 10GBASE-T |
| Host Interface | SFP+ |
| Electrical Interface | RJ45 |
| Connector | RJ45 |
| Transmission Medium | Copper Ethernet Cable |
| Recommended Cabling | Cat6A / Cat7 |
| Transmitter | Copper PHY |
| Enclosure | Fully Metallic |
| Power Supply | Single +3.3V |
| Power Dissipation | Project/Platform Dependent |
| Operating Temperature | -40°C to +85°C |
| TX Disable | Supported |
| RX Loss of Signal | Supported |
| Management Interface | 2-Wire Serial Bus |
| DDM / Management | Host-Side Management Supported |
| Vendor Compatibility | Broadcom / HP Compatible Options |
| Application | 10G Ethernet / Industrial Ethernet |
Features
- 10Gbps Ethernet data rate
- SFP+ hot-pluggable form factor
- RJ45 copper electrical interface
- Transmission distance up to 30m
- Supports Cat6A and Cat7 Ethernet cabling
- Industrial operating temperature of -40°C to +85°C
- Fully metallic enclosure for enhanced EMI shielding
- TX Disable and RX Loss of Signal functions
- 2-wire serial management interface
- Compatibility options for Broadcom- and HP-based equipment
Applications
- Industrial Ethernet networks
- Data center copper connections
- SFP+ switch-to-switch links
- Server and network equipment connectivity
- Enterprise Ethernet networks
- High-temperature and low-temperature networking environments
- Upgrading compatible SFP+ equipment to 10G copper connectivity
FAQs
What cable is required for this transceiver?
The module supports standard Cat6A or Cat7 copper Ethernet cabling for 10Gbps transmission up to 30m.
Can it be installed directly into an SFP+ port?
Yes. The module uses a standard hot-pluggable SFP+ form factor and is designed for compatible SFP+ switches, routers, servers, and other network equipment.
What is the operating temperature range?
The industrial version supports an operating temperature range of -40°C to +85°C, making it suitable for environments with significant temperature variations.
Does the module support vendor-specific equipment?
Yes. Compatibility options are available for specific Broadcom- and HP-based network platforms. The required compatibility should be specified when ordering.
What management and monitoring functions are supported?
The module provides TX Disable, RX Loss of Signal, and 2-wire serial management functions for device control and monitoring.
Quality Qulifications and Compliance
To get the detailed certification, please go to the Compliance.
Please Note: Our products comply with all internationally recognized and industry-standard specifications. For customized or special requirement products, we carry out testing and standards in accordance with the conformity criteria specified in the contract.
Related Products
Have Questions? Contact Our Product Experts or Sales Team Today! We Will Fedback You Soon.
