Skip to content 
LC/UPC LC/UPC Duplex Uniboot OM2 Outdoor Fiber Patch Cord, Industrial IP67 Dustproof Outdoor
Categories:
Product Highlights:
-
Designed for high-density FTTA and base station environments, this industrial-grade outdoor patch cord utilizes a Single-Jacket Uniboot structure that houses two fibers in one 4.8mm/5.0mm round cable, drastically reducing cable bulk.
-
Featuring an LC Duplex interface with integrated polarity-switching technology, it allows for fast on-site adjustments without exposing the delicate optical fibers, ensuring 100% compatibility with RRU/RRH ports.
Table of Contents
Description
The FiberMania Outdoor LC Uniboot Fiber Patch Cord represents a significant evolution in FTTA (Fiber-to-the-Antenna) cabling, specifically designed to address the space constraints of modern 5G and 4G cell sites. Unlike traditional duplex cables that rely on two separate interconnected strands, the Uniboot design encapsulates two OM2 multimode fibers within a single, ruggedized round jacket. This structural optimization reduces the cable footprint by nearly 50%, facilitating easier routing through tight tower conduits and significantly lowering the wind load on exposed structures.
The connector features a streamlined Uniboot housing that integrates both fibers into a single boot. A key technical advantage of this design is its support for rapid polarity reversal. In field installations where Tx and Rx positions may be swapped, technicians can switch the polarity in seconds without specialized tools, maintaining the integrity of the factory-sealed environment. This is particularly vital for Remote Radio Unit (RRU) and Baseband Unit (BBU) connections where uptime is critical.
Beyond its compact geometry, this patch cord is built for the rigors of industrial-grade outdoor use. It combines the high-bandwidth capabilities of OM2 fiber with a heavy-duty, UV-stabilized jacket and IP67-rated sealing. This ensures that the high-precision LC interface remains protected from moisture ingress, dust, and extreme temperature fluctuations. FiberMania’s Uniboot solution is the professional choice for operators looking to modernize their wireless site architecture while ensuring long-term mechanical and optical reliability.
Specification
| Cable Structure | Round Single-Jacket Uniboot |
|---|---|
| Connector Type A | LC/UPC Uniboot |
| Connector Type B | LC/UPC Uniboot |
| Connector Type | LC/UPC Duplex (Polarity Reversible) |
| Insertion Loss | ≤0.3dB (Typical 0.2dB) |
| Return Loss | ≥30dB |
| Fiber Count | 2-Fiber |
| Fiber Mode | OM2 50/125μm |
| Wavelength | 850/1300nm |
| Cable Diameter (Outer/Inner) | 5.0mm |
| Min. Bend Radius | 20/10D (Dynamic/Static) |
| Tensile Load | Long term 300N / Short term 600N |
| Attenuation at 850nm | 3.5dB/km |
| Attenuation at 1300nm | 1.5dB/km |
| Operating Temperature | -20 to 70°C |
| Storage Temperature | -40 to 80℃ |
| Ingress Protection | IP67 (Waterproof/Dustproof) |
Features
-
Space-Saving Uniboot Design: Single 4.8mm/5.0mm round jacket reduces cable volume by 50% compared to standard duplex zipcord.
-
Easy Polarity Reversal: Integrated connector design allows for quick field polarity switching without tools or fiber exposure.
-
IP67-Rated Ingress Protection: Provides a complete seal against high-pressure water jets and fine dust particles in outdoor environments.
-
Industrial-Grade Durability: UV-resistant, anti-corrosive, and crush-resistant jacket engineered for permanent tower-top exposure.
-
Low Optical Loss: Precision-milled LC ferrules ensure Insertion Loss ≤ 0.3dB and stable signal integrity across 1310nm/1550nm.
-
High-Density Optimized: Small form factor boot and circular cable design allow for improved airflow and easier cable management in RRU enclosures.
-
Extreme Temperature Tolerance: Maintains consistent performance from -20°C to +70°C, suitable for global climate deployments.
Application
-
FTTA Infrastructure: Primary link between 5G AAU-DU and 4G RRU-BBU in space-constrained sites.
-
High-Density Wireless Sites: Ideal for small cell and macro cell deployments requiring clean, compact cable routing.
-
Remote Radio Head (RRH) Connectivity: Direct connection to RRH equipment on towers, rooftops, and street poles.
-
Industrial Outdoor Networking: Used in ruggedized communication systems, smart grids, and outdoor Wi-Fi backhaul.
-
Modular Data Centers: Suitable for outdoor containerized data centers where high-density cabling is essential.
Q&A
What is the main advantage of Uniboot over standard Duplex cables in FTTA? The primary advantage is space and weight reduction. A Uniboot cable uses a single round jacket for two fibers, which is easier to pull through tower conduits and creates less wind resistance on the tower compared to the flat “eight-shaped” duplex zipcord.
Does reversing the polarity require opening the connector? No. Our LC Uniboot design allows polarity reversal by simply rotating the connector housing or flipping the clips (depending on the specific model) without exposing the optical fibers to the environment, preventing contamination.
Can FiberMania produce this in 100-meter+ lengths for high towers? Absolutely. As a direct manufacturer, we produce custom lengths ranging from 0.5m to 500m+. Every long-length cable is tested for attenuation and mechanical integrity before shipping.
Is the OM2 fiber compatible with 10G or 25G base station upgrades? While OM2 is excellent for standard 1G/10G links over shorter distances, for high-speed 25G or 100G 5G fronthaul, we often recommend our OM3 or OM4 Uniboot versions. We can provide a technical comparison to help you choose the right grade.
Quality Qulifications and Compliance
To get the detailed certification, please go to the Compliance.
Please Note: Our products comply with all internationally recognized and industry-standard specifications. For customized or special requirement products, we carry out testing and standards in accordance with the conformity criteria specified in the contract.
Related Products
Have Questions? Contact Our Product Experts or Sales Team Today! We Will Fedback You Soon.
