Skip to content 
FullAXS to LC Uniboot Duplex OM2 IP67 Outdoor FTTA Patch Cord IP67 Grade
Categories:
Product Highlights:
-
Optimized for 4G/5G wireless infrastructure, this industrial-grade cable features a ruggedized FullAXS connector and a space-saving LC Uniboot duplex structure to deliver high-capacity OM2 multimode transmission in high-density environments.
-
Engineered for the extreme conditions of FTTA deployments, it provides a superior IP67-rated seal against moisture and dust while maintaining mechanical flexibility for complex routing on cellular towers and rooftops.
Table of Contents
Description
The FiberMania FullAXS-LC Uniboot Fiber Patch Cord is a high-performance connectivity solution specifically developed for modern wireless site architectures. As telecommunications networks transition to Fiber-to-the-Antenna (FTTA) models, the connection between the Baseband Unit (BBU) and tower-top Remote Radio Units (RRU) requires cabling that can withstand harsh environmental stress without signal degradation. This assembly features the industry-standard FullAXS connector system, which allows for a secure, one-handed “blind-mate” installation through RRU bulkhead ports, even in the most challenging tower-top conditions.
By integrating the LC Uniboot design, this patch cord manages two OM2 multimode fibers within a single 4.8mm round jacket. This structural optimization is critical for outdoor deployments, as it reduces the wind load on the tower and minimizes the footprint within crowded enclosures and cable trays. The Uniboot connector further enhances efficiency by allowing for rapid polarity reversal in the field, ensuring technicians can quickly adapt the cable to match specific equipment configurations without risking contamination of the optical fibers.
Durability is at the core of this industrial-grade assembly. The cable is built with a UV-stabilized, flame-retardant LSZH jacket and reinforced internal strength members to resist extrusion and tensile forces during vertical routing. With its wide operating temperature range and robust IP67 ingress protection, the FiberMania FullAXS-LC Uniboot jumper provides the reliable, long-term stability needed for 5G AAU-DU signaling and high-speed data transmission in distributed antenna systems and power communication networks.
Specification
| Connection Structure | FullAXS to LC Uniboot Duplex |
|---|---|
| Fiber Mode | Multimode OM2 (50/125μm) |
| Core Count | 2 Core |
| Cable Structure | Round Single Jacket (4.8mm) |
| Insertion Loss | ≤0.3dB |
| Return Loss (MM) | ≥30dB |
| Polarity | Field Reversible |
| Jacket Material | LSZH (UV-Stabilized) |
| Wavelength | 850/1300nm |
| Cable Diameter (Outer/Inner) | 4.8mm |
| Min. Bend Radius | 20/10D (Dynamic/Static) |
| Attenuation at 850nm | 3.5dB/km |
| Attenuation at 1300nm | 1.5dB/km |
| Operating Temperature | -20 to 70°C |
| Storage Temperature | -40 to 80℃ |
| Certification | RoHS, CE, ISO9001, VDE, CCC |
Features
-
Space-saving LC Uniboot structure houses two fibers in a single 4.8mm jacket, reducing cable bulk by 50%.
-
IP67-rated FullAXS connector provides a reliable, waterproof, and dustproof seal for outdoor RRU/RRH ports.
-
Tool-less polarity reversal allows for fast field configuration without exposing sensitive optical end-faces.
-
High-precision zirconia ferrules achieve low insertion loss (≤0.3dB) for consistent signal integrity.
-
UV-resistant and anti-corrosive LSZH jacket designed for long-term outdoor exposure on towers and rooftops.
-
Bend-insensitive fiber technology enables tight routing in narrow spaces without increased attenuation.
-
Rugged mechanical design resists high lateral pressure (>1000N/100mm) and tensile stress.
Application
-
FTTA (Fiber-to-the-Antenna) connectivity for 5G AAU-DU and 4G RRU-BBU signal transmission.
-
Outdoor horizontal and vertical routing on building exteriors and communication towers.
-
Distributed Antenna Systems (DAS) and small cell installations in urban environments.
-
Long-distance optical signal delivery between base station equipment and antennas.
-
Ruggedized networking for power systems, smart grids, and industrial communication environments.
-
Remote signal transmission for WiMAX and high-speed wireless access networks.
Q&A
Why is the FullAXS-LC Uniboot combination better for 5G towers? The FullAXS connector allows for quick, blind-mate installation in tower-top RRUs, while the Uniboot design reduces the cable diameter significantly. This combination lowers wind load and space usage on the tower, which is critical as 5G requires more antennas and equipment in limited space.
Does FiberMania offer 1pcs MOQ for customized lengths? Yes. As a flexible OEM manufacturer, we support 1pcs minimum order quantities for custom lengths and configurations. This allows our partners to fulfill specific site requirements or emergency repairs without holding excessive inventory.
Can the polarity of the LC Uniboot connector be changed in the field? Yes, our Uniboot design features a tool-less polarity reversal mechanism. Technicians can switch the Tx/Rx positions in seconds without exposing the optical fibers to the outdoor elements, ensuring 100% field adaptability.
How does FiberMania ensure the quality of these outdoor cables? Every assembly undergoes 100% optical testing for insertion loss and return loss. Additionally, our ISO9001-certified factory utilizes precision molds and rigorous mechanical testing to ensure the IP67 sealing and tensile strength meet international telecom standards.
Quality Qulifications and Compliance
To get the detailed certification, please go to the Compliance.
Please Note: Our products comply with all internationally recognized and industry-standard specifications. For customized or special requirement products, we carry out testing and standards in accordance with the conformity criteria specified in the contract.
Related Products
Have Questions? Contact Our Product Experts or Sales Team Today! We Will Fedback You Soon.
